Use Learning Path for your D365 v9.x Organization – Part 1 | Setup

Learning Path an intuitive feature as compared to Customized Help. Customized Help will take you to an entirely different section whereas Learning Path will guide you through the application when you use the system. This is a multi-part blog series which will walk-through the setup of Learning Path and use of Guided Task and Sidebar in Learning Path.

Also, I’ve you’ve already setup Learning Path on your org, you can read my post on using Sidebars in Learning Path – Use Learning Path Learning Path for your D365 v9.x Organization – Part 2 | Sidebar

And Guided Tasks is here – Use Learning Path for your D365 v9.x Organization – Part 3 | Guided Tasks

Learning Path is available on Customer Engagement and the organization must be on D365 December 2016 Update or later.

Let’s look at how you can enable this for your Organization

Opt-In for Learning Path

  1. First step is to go to Settings > Administration > System Settings. Under General Tab, find ‘Enable Learning Path’ and ‘Enable Learning Path Authoring’. Make sure ‘Use custom Help for customizable entities’ is set to No.
    optIn
  2. When you chose to enable Authoring, a confirmation will be asked for your consent according to Microsoft policies.
    confirmAuthoring

Learning Path Authoring Group

  1. When you’ve opted in for Learning Path Authoring, and in your navigation you go to Training > Content Library under Learning Path.
    lpSiteMap
  2. But you’ll be treated with this message below because you’ve not yet been added to the Group in Office 365.
    lpError

Add to Learning Path Authoring Group in O365

  1. In your Office 365 Admin Center, navigate to Groups as shown below
    authoringGroupInO365
  2. And you should add the Sys Admin user to the Learning Path Author groups as shown below –
    adminAddedToGroup

    Sync Roles in Content Library

    When you’ve enabled Learning Path successfully, you will need to check which Security Roles are enabled in Learning Path designer. The content is shown to users based on the precedence of their security roles.

    1. Navigate to Content Library, you’ll find Configuration button on top as shown below –
      configApp
    2. Under configuration, you’ll see Sync Role button which will sync security roles with Customer Engagement security roles. You can set your precedence of Security Roles before you Sync Roles.
      syncRoles
    3. Click Yes to confirm, it takes a few minutes while it’s happening in the back end.
      confirmSync
    4. Upon completion, you’ll see this message and you know you’re done.
      syncDone
    5. Once everything is setup, you’ll be ready to use Guided Task and Sidebar in Learning Path which I’l be covering in further blog posts in this series.
      lpReady

     

Here’s Part 2 – Use Learning Path Learning Path for your D365 v9.x Organization – Part 2 | Sidebar

And Part 3 – Use Learning Path for your D365 v9.x Organization – Part 3 | Guided Tasks

Advertisements

5 thoughts on “Use Learning Path for your D365 v9.x Organization – Part 1 | Setup

Leave a Reply to Use Learning Path Learning Path for your D365 v9.x Organization – Part 2 | Sidebar | D365 Demystified Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.